Anchors produces refractory anchors for castable linings.
Our range can suit all applications, We produce refractory anchoring systems in round and flat material, for hand welding, for gun welding, for all types of concrete density.
A1 : “CH” type anchors
CH1 – CH2 – CH4 – CH1RL : Castable anchor suitable for hand welding, for thin thickness, corrugated CH4 is always better for more anchoring-Hand welding.
A2 : “UV” type anchors
UV – UBL : Castable anchor suitable for hand welding, for single layer with small thickness (typical application : tuyère/boiler) – Hand welding.
A3 : “V” type anchors
V1 – V2 : Castable anchor suitable for hand welding, for thin thickness, but CH type allows easier, stronger, safer welding.
A4 : “CV” type anchors
CV1 – CV2 – CV4 – CVRL – ceramic ferrule : Castable anchor suitable for gun welding, for thin thickness.
A5 : “VS” type anchors
Castable anchor suitable for hand welding, the bent foot allows easier 90° positioning on steel casing and makes welding longer/stronger.
A6 : “CBH-HBH” type anchors
CBH – HBH – HBR – CBHSG : Castable anchor suitable for hand welding, for thicker linings. This type of anchor presents 2 angles to limit the opening at the tip of the anchors.
A7 : “STP-CTH” type anchors
STH – CTH – HTH – STP – CTP : Castable anchor for multi-linings/twin-pin.
A8 : “TW” type anchors
TWA – TWM – TWU – TWS – TWSS : Castable anchor for hand welding, for multi-linings. Type of anchor used in all industries (cement industry-steel…). The bent foot allows easier 90° positioning on steel casing and makes welding longer/stronger.
A9 : “E” type anchors
YRA – YRB – YHA – YHB : Castable anchor in plate slotted used in many applications.
Other models on request, according to your drawings.
A10 : STEEL FIBRES
A10 : STEEL FIBRES : reinforce refractories against cracking to extend and enhance refractory life.
